Ddj 400 Slicer

The DDJ-400 is a dedicated controller equipped with interfaces for the intuitive operation of various functions of Pioneer DJ's software rekordbox dj. The controller is compatible with rekordbox dj’s Tutorial feature, explaining from basic equipment operation through to necessary know-how for DJing. Page 206: To Use The Slicer Function ・The slicer function cannot be used with tracks for which no beatgrid is set. For details on setting beatgrids, see 5.2.122 Grid edit. 5.10.1 To use the slicer function Click the SLICER button of the track The panel is changed to the slicer mode. Click button to switch to the slicer loop mode. UPDATE: Algoriddim has added native support for the DDJ-400, which provides a compact Pioneer controller with a built-in soundcard. If I was buying a new controller today, I would buy the DDJ-400 from Amazon in a heartbeat (paid link).

Buddy

The Reloop Buddy is a compact and powerful 2-channel DJ controller designed exclusively for djay. This innovative controller comes with FX paddles, 8 performance modes, and dedicated Neural Mix™ controls so you can isolate vocals and instrumentals in real-time. The ultra-portable design combined with high-quality materials makes Buddy the perfect companion for djay across desktop and mobile devices.

Visit WebsiteWatch VideoBuy on Amazon

Works
with

CDJ System

djay Pro offers native integration with Pioneer DJ’s CDJ-2000NXS2, CDJ-2000NXS, CDJ-900NXS, and XDJ-1000, the industry-leading club setup for DJs. Access your playlists directly from the CDJ’s screen including waveform and cue points display. Full hardware control includes slip mode, scratching, pitch bending, looping, cueing, master tempo, and more.

Learn MoreWatch VideoBuy on Amazon

Works
with

  • iOS
  • Android

DDJ-200

DDJ-200 is the Smart DJ controller by Pioneer DJ. Seamlessly integrated with djay on mobile and desktop devices, the DDJ-200 offers you an intuitive way to mix music on-the-go. Use djay for a cutting-edge wireless integration with the DDJ-200 using ultra-low latency via Bluetooth (requires iOS), or connect the DDJ-200 to your computer via USB (e.g. on Mac or Windows).

Visit WebsiteWatch VideoBuy on Amazon

Works
with

DDJ-WeGO4

DDJ-WeGO4 is a compact entry level DJ software controller by Pioneer DJ. Seamlessly mix all your music with tactile controls and start scratching with the jog wheels. DDJ-WeGO4 comes with a built-in sampler, Hot Cues and Pad FX inherited from professional hardware. Just plug in your laptop, tablet or smartphone and start to play.

Visit WebsiteWatch VideoBuy on Amazon

Works
with

Beatpad 2

Slicer, loop, sampler and dynamic multi-effect control are just a few of the new, exciting remixing possibilities that can now be controlled directly via the Beatpad 2. The touch-sensitive drum pads with smart RGB illumination give you visual feedback for the selected mode so you know exactly what you're doing.

Visit WebsiteWatch VideoBuy on Amazon

Works
with

MIXON 4

MIXON 4 is the first 4-channel high performance DJ controller that is compatible with our DJ Software for Mac and our djay Apps for iOS. MIXON 4 is able to connect iOS devices with a Lightning connection, while simultaneously charging your device. For the first time it is possible to place an iPad PRO (12.9') into the docking station and experience the raw performance on up to four decks.

Visit WebsiteWatch VideoBuy on Amazon

Works
with

Reloop MIXTOUR

MIXTOUR has been designed from the ground-up to offer a compact, two-channel DJ controller layout which allows you to get the party started anywhere, anytime. This portable controller works with djay 2 for iOS & Android and djay Pro for iPad and Mac. It comes with a built-in audio interface and all necessary mixing controls.

Visit WebsiteWatch VideoBuy on Amazon

Works
with



  1. PAD MODE. Press any of the 4 available Pad mode buttons to set the Pads to Hotcues, FX Fade, Pad Scratch and Sampler mode.
    Hold SHIFT and then press any of the 4 available Pad mode buttons to set the Pads to Beatjump, Loop Roll, Slicer and Trans mode.
  2. PADS. The 8 Pads offer different functionality depending on the selected mode.

The Parameters of each mode can be adjusted from the VirtualDJ GUI (Pads section)
Read further details about Pads in the VirtualDJ 8 manual

HOTCUES




FX FADE




In this mode:400
- PAD 1 : Press Pad 1 from DDJ-SB3. Its led will start blinking and a High-Pass Filter will be applied, starting from the Off position, gradually increasing and stop at the maximum Cut. Press again to turn off the High-Pass Filter and automatically bring Filter to its Off position.
- PAD 2 : Press Pad 2 from DDJ-SB3. Its led will start blinking and a Low-Pass Filter will be applied, starting from the Off position, gradually decreasing and stop at the minimum Cut. Press again to turn off the Low-Pass Filter and automatically bring Filter to its Off position.
- PAD 3 : Press Pad 3 from DDJ-SB3. Its led will start blinking, an Auto-Loop of 1 beat will be enabled at the current position and the Deck's Volume will gradually decrease and will reach the minimum position (Fade). Press the same Pad again, to turn off the Loop and bring Volume back to the position it was before the Pad was enabled.
- PAD 4 : Press Pad 4 from DDJ-SB3. Its led will start blinking, and the track will perform a Back-spin*. When the back-spin is completed, the track will automatically resume playing from the current position.
- PAD 5 : Press Pad 5 from DDJ-SB3. Its led will start blinking and a High-Pass Filter will be applied, starting from the Off position, gradually increasing and stop at the maximum Cut. Press again to turn off the High-Pass Filter and automatically bring Filter to its Off position. This Pad works similar to Pad 1, but the time required to reach from the Off position to the maximum Cut positions is longer
- PAD 6 : Press Pad 6 from DDJ-SB3. Its led will start blinking and a Low-Pass Filter will be applied, starting from the Off position, gradually decreasing and stop at the minimum Cut. Press again to turn off the Low-Pass Filter and automatically bring Filter to its Off position. This Pad works similar to Pad 2, but the time required to reach from the Off position to the minimum Cut positions is longer.
- PAD 7 : Press Pad 7 from DDJ-SB3. Its led will start blinking and an Auto-Loop of 4 beats will be enabled at the current After the 4 beat loop is played once, the loop size will be automatically set to 2 beats. After the 2 beats loop is played 2 times, the loop size will be automatically set to 1 beat. After the 1 beat loop is played 4 times, the loop-size will be automatically set to 1/2 beat. After the 1/2 beat loop is played 8 times, the loop-size will be automatically set to 1/4 beats and stay enabled, until the Pad is pressed again.
- PAD 8 : Press Pad 8 from DDJ-SB3. Its led will start blinking, and the track will perform a Back-spin*. When the back-spin is completed, the track will automatically resume playing from the current position. This Pad offers the same functionality as Pad 4, but the Backspin in this case will be longer.
* Back-spin duration can be adjusted from the DDJ-SB3 Utilities. See further details in the DDJ-SB3 Manual https://www.pioneerdj.com/en/support/documents/ddj-sb3/

PAD SCRATCH


Press the PAD SCRATCH mode button to set the PADs to Pad Scratch mode (button will be lit solid) and automatically load the Pad Scratch Pads page in VirtualDJ GUI
The PAD SCRATCH is a mode controlled from the unit's firmware. Each Pad performs a function provided from the DDJ-SB3, and cannot be assigned to any VirtualDJ action. The functionality of the Pads in this mode, only operate when triggered from the DDJ-SB3 and the Pads on the GUI will not perform any action.


In this mode, each one of the 8 Pads performs a different Scratch routine as long as the Pad is pressed, starting from the selected Hotcue and its steps will be synchronized to the tempo of the track. When the Pad is released, the track will resume playback.
Hold SHIFT down and then press Pads 1 to 4, to select Hotcue 1 to 4 as the selected Hotcue for the scratch routine. If the Hotcue is not assigned, and a Pad scratch Pad (1 to 8) is pressed, the selected Hotcue will be set at the current track's position.
Hold SHIFT and then press Pad 5 to select a release mode for the Scratch routines. If disabled (its led will be off), after releasing a Pad Scratch routine pad (1 to 8), the track will resume playback from the current position. If enabled (its led will be lit), after releasing a Pad Scratch routine pad (1 to 8), the scratch routine will continue until it reaches the Hotcue and after that, will continue playback.

Ddj 400 Not Recognized


Pads 6 to 8 when SHIFT is pressed, have no functionality in this mode.
Tip: For best Scratch performance, make sure the TouchWheelSpinThreshold setting (in VirtualDJ->Settings->Options tab) is set at value 2.0 or higher (default value is 0.8)

SAMPLER




Use the Parameter arrow-buttons from the GUI of VirtualDJ (Pads section) to select the Sampler Bank (previous/next).

Beatjump mode




LOOP ROLL


Ddj 400 Slicer Download



SLICER



Pioneer Ddj 400


Ddj 400 Slicer Machine

Hold SHIFT and then use the Pads to repeat the memorized Slices (the Slices played/repeated last time)
Use the Parameter arrow-buttons from the GUI of VirtualDJ (Pads section) to adjust the length of the Loop applied to the slice. or adjust the step of the Slices

TRANS



In this mode :

Ddj 400 Slicer User

- Pads 1 to 7 perform a Cut Effect of a different size in Beats (from 1/16 to 2 beats) by automatically toggling the Deck's volume
between the current and the minimum position.
- Pad 8 offers the ability to perform a Manual Cut Effect, by automatically set Deck's volume to minimum position while pressed and set back to the previous-memorized volume when released.

Ddj 400 Slicer

Front & Rear