This in depth guide will take you every step of the way through installing Ubuntu Linux on your Mac, by way of VirtualBox – a free and outstanding program. Using this method you’ll be able to run Ubuntu and macOS at the same time!
Mac OS X on Ubuntu through VMware? Ask Question Asked 8 years, 5 months ago. Active 3 years, 6 months ago. Viewed 10k times 1. Can I install Mac OS on my PC through VMware. I'm using Ubuntu 12.04 LTS as a host operating system. 12.04 vmware macosx. Improve this question.
Try Ubuntu Appliances in a VM Ubuntu Try out Ubuntu Appliances on Ubuntu, Windows or macOS Try out Ubuntu Appliance images in an isolated virtual machine on your PC or Mac with Multipass. You can navigate through the setup instructions and interact with the software before taking the next step and installing it on a Raspberry Pi or a PC. Quick description. Launch VMWare Fusion (the instructions here are for version 7). Click on File - New and choose to Install from disc or image.; Click on Use another disc or disc image and choose your.iso file with the Ubuntu image.; Choose Easy Install, fill in password, and check the box for sharing files with the host operating system.; Choose Customize Settings and make the following. Step3: Install VirtualBox in Ubuntu. You should have your VirtualBox and the Extension Pack installed, or use my ansible role. Step 4: Open VirtualBox and create a new VM. Settings: name: yoursierravmname; type: Osx; version: Mac OS X 10.11 El Capitan (64-bit) Other. Vm This is the command vm that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator Run in Ubuntu Run in Fedora Run in Widows Sim Run in MACOS Sim.
Please note: although this guide was initially authored in 2015, it has been updated (2020) to be current. The following guide uses Ubuntu 18.04.3 LTS “Bionic Beaver”, but the steps and screenshots are nearly identical for most versions of Ubuntu, up to including 20.04.1 LTS.
Using this method to install Ubuntu not only allows you to run it and macOS at the same time, you can really try out Ubuntu – and if you don’t like it – very easily get rid of it. Plus, it will not affect the files in macOS itself at all. None of the data on your Mac is at risk of being deleted or altered. The entire process is actually quite straightforward – and all of the software involved is free – so why not give it a shot :)
- Before you get started, there are a few things that should be noted up front.
- Depending on the speed of your Internet connection, it might take a while to download Ubuntu. During the actual installation process, based on the version of Ubuntu you opt to install – you may have to spend some time downloading updates as well.
- The installation time is about 20 minutes, depending on the speed of your Mac, amount of memory etc. You may want to make yourself a cup of coffee or tea before you start.
- Running both Ubuntu and macOS at the same time will “slow down” your Mac. The more memory you have and the faster your CPU and/or hard drive is, the less you’ll notice it.
Let’s get started!
If this article helped you, I'd be grateful if you could share it on your preferred social network - it helps me a lot. If you're feeling particularly generous, you could buy me a coffee and I'd be super grateful :)
- First up, head over to the Ubuntu download page and download Ubuntu.
- Now you’ll need to download and install VirtualBox. Visit their download page and click the link OS X hosts (which is the current stable version). Once the download has completed, open the .dmg file and run the installer – the installation is as easy as clicking ‘next’ a bunch of times. When installation is done, launch VirtualBox from your Applications folder.
- When VirtualBox opens, click the New button.
- Give your “virtual machine” a name (something descriptive is good, but it doesn’t matter). Make sure the Type: is set to Linux and the Version: is Ubuntu (64 bit). Then click the Continue button.
- Now you’re going to decide how much memory (RAM) you’re going to allocate to Ubuntu when it’s running, and how much to leave for macOS. As illustrated in the screenshot below, my total RAM is 4GB, so I allocated half of it to Ubuntu, and the other half to macOS. The more memory you give to Ubuntu, the faster it will run. The drawback is that macOS will have less to use while Ubuntu is running. At a minimum, give Ubuntu at 1GB (1024MB) of RAM. When you’ve decided how much memory (RAM) to give Ubuntu, click the Continue button.
- On the Hard drive screen, select Create a virtual hard drive now and then click Create.
- Now select VDI (VirtualBox Disk Image) and click Continue
- Select Dynamically allocated and yep – you guessed it – click Continue
- Use the “slider” to determine the size you want to make the “hard drive” for Ubuntu. At a minimum, you’ll want to select 6GB – and that will not allow for you to install many programs, let alone store files etc. Keep in mind that because you selected “Dynamically allocated” in the previous step, that does not mean that VirtualBox is going to take up that space right away. It means that as Ubuntu needs more space, it will allow the “hard drive” to increase up to whatever size you set at this step.
As illustrated in the screenshot below, I opted to give Ubuntu 10GB. That’s enough for the installation and to install quite a few programs. Since I won’t be “storing” many files in Ubuntu (movies, pictures, music etc) – 10GB will suit my needs. Plus, I have a small hard drive on my MacBook Air. If you have a big hard drive, you might as well allocate more rather than less, again – the space won’t be used until it’s needed. After you’ve made your selection, click Create.
- Almost time to install Ubuntu! Click the Start button.
- If you’re using macOS 10.15 (Catalina) or later, you’re going to need to ‘allow’ Virtualbox to receive keystrokes from any application (which is completely safe). Click the Open System Preferences button.
- Click the ‘lock’ icon in the bottom left corner of the screen. After entering your password, place a check in the box next to the Virtualbox item in the list.
- Click Later when prompted.
- Back in Virtualbox you’ll be prompted to locate a file. Click the “folder” icon next to menu that says Empty (see screenshot below).
- Again, if you’re using macOS 10.15 or later, you’ll be prompted to grant permission for Virtualbox to access a folder. Click OK. You may be prompted to do this several more times – just click OK each time.
- Navigate to the Ubuntu .iso file that you downloaded all the way back in step #1. Select it, and click Open
- Now click Start
- Finally! Click Install Ubuntu
- Select your keyboard layout and preferred language then click Continue
- Make sure to place a check in both of the boxes – Download updates while installing Ubuntu and Install third-party software for graphics and Wi-Fi hardware and additional media formats – then click the Continue button.
- Select Erase disk and install Ubuntu. NOTE: this is not going to ‘wipe out’ or erase any data in macOS. None. It is safe to click Install Now, so do just that.
- Click Continue
- When prompted, select your Time Zone and then click Continue
- Fill in each field with the required information. When you’re done, Continue
- Now it’s time to sit back and relax with that cup of coffee or tea. This may take a bit.
- Yay! It’s done! Click Restart Now
- Hit Enter (the ‘return’ key on your keyboard) when prompted.
- And you’ll boot into Ubuntu! Enter your password when prompted.
- Welcome to the Ubuntu Desktop! At this point you should be connected to the Internet and completely ready to go – have fun!
In this blog post we’re going to create a Ubuntu 20.04 VM using QEMU on MacOS.
Macos Vm On Ubuntu
Note for users on macOS 11.0: follow this post first to get qemu to run.
QEMU is a hardware emulator which can make use of different accelerators when running VMs. The most popular accelerator is KVM which is built into the Linux kernel and allows Linux hosts to run VMs with native performance.
Using QEMU on macOS used to be very slow as no accelerator was available. This changed 2 years ago when the project added support for the macOS native hypervisor with Hypervisor.framework (HVF) as an accelerator.
Before we begin with the setup I assume that the Ubuntu 20.04 Desktop ISO has been downloaded in the current working directory.
We can use Homebrew to install QEMU. The version we’re using in this tutorial is 5.1.0:
It will pull in a few dependencies (the package depends on 14 other packages) and the installation can take a few minutes.
Create the disk image
Once the installation is done, we can create the disk image that we’re going to install Ubuntu on.
We’re using the QCOW2 format to create a 20GB image. This can be resized later on if needed. The Ubuntu installation took around 5GB of space when I installed it.
Boot machine with Ubuntu ISO mounted
We can now boot up the machine with the Ubuntu ISO attached as a
In this step we boot up the machine with the Ubuntu ISO mounted in the CD drive:
The options are:
-machine: The emulated machine and the accelerator. q35 is the newest machine type and HVF is the macOS native hypervisor.
-smp: Number of CPUs to use
-m: Amount of memory to use
-hda: Disk drive (the one we created earlier)
-cdrom: The ISO image to put into the CD drive
-vga: The graphic card to use. I found
virtio(based on Virgil to have the best performance
-usb: Enable USB host controller
-deviceAdding a “usb-tablet” as an input device. I’m running this on a laptop and without this setting the mouse did not work.
-display: To show the mouse cursor (disabled by default)
During testing I had problems with the Linux kernel as it would panic during the boot process. The issue was the
-cpu parameter. I fixed it by specifying the CPU architecture manually (see
qemu-system-x86_64 -cpu help for a list of all available architectures).
My machine has an IvyBridge processor (Core i7):
-cpu IvyBridge would fail. However when using
-cpu Nehalem (also an i7 CPU) everything worked well.
Ubuntu Vm Manager
Now after the machine is booted up the Ubuntu installer will run. Follow the installation steps and don’t restart the VM at the end of the installation, instead shut it down by stopping the qemu process with CTRL-C on the host.
Boot without ISO mounted
Mac Os Virtualbox
When running the VM we don’t need the Ubuntu ISO mounted and can remove it by leaving out the
Ubuntu Vmware Macos
Ubuntu Virtual Machine Macos
In my experience QEMU is faster, more responsive and uses less CPU/RAM than VirtualBox. I didn’t have to configure any display scaling for HiDPI screens as it worked out of the box. The only thing I’m missing are shared clipboards and drag-and-drop of files (which are available when installing the VirtualBox Guest Additions).